AURA-KP

SCADA remote terminal unit

  • IEC 60870-5-101/104 communications
  • OPC server integration
  • Acquisition of measurements and binary signals from AURA recorders

The AURA-KP distributed remote terminal unit is designed for telemetry and remote control systems used for operational monitoring and control, and for automated control systems at power utilities and industrial facilities.

Request a quote

Applications

The AURA-KP distributed remote terminal unit is designed for telemetry and remote control systems used for operational monitoring and control, and for automated control systems at power utilities and industrial facilities.

The remote terminal unit comprises a data acquisition and communication unit and digital measuring transducers distributed throughout the facility. The transducers communicate with the central unit over Ethernet through Ethernet/RS-485 converters.
In addition to transducers, third-party digital measurement systems can be connected to the RTU over IEC 60870-5-101, IEC 60870-5-104 or OPC servers.
AURA-KP supports redundant central units and measuring transducers.

Typical SCADA system architecture

For sites with a relatively small number of signals (up to 1000) and two or three IEC 60870-5-101 or IEC 60870-5-104 clients, a compact central unit can be panel-mounted or installed in a cabinet.

Portrait image
AURA-KP central unit
Wide image 1
AURA-KP central unit, front view
Wide image 2
AURA-KP central unit, rear view

For larger sites high-performance industrial computers serve as central units.
The AURA-KP configuration shown below has redundant data acquisition and communication units and a slide-out display and keyboard.

AURA-KP installed in a cabinet
For more information on SCADA systems with and without an RTU, follow these links.
  • Total measured-value, integrated-total, status-indication and control channels: up to 24,000
  • Complete polling cycle for all measuring transducers: no more than 1 second
  • Communication protocols IEC 60870-5-101/104, AURA

The unit is powered by an external 24 V DC power supply accepting 120–370 V DC or 85–264 V AC.

Weight: 1.3 kg.

AURA-KP central unit overall and mounting dimensions
AURA-KP provides the following capabilities.
  • a distributed SCADA data acquisition system covering a radius of up to 15–20 km
  • expandable capacity for measurements, status indications and control commands as the system grows
  • reliable remote control outputs with support for processing operational interlock signals
  • hardware protection against software failures
  • automatic self-diagnostics, event logging and fault alarms
  • one-second measurement archives
  • synchronization of the internal clock to system time over the network, or GPS synchronization with accuracy of ±10 ms or better
  • partial or full redundancy of system components
  • measurement error for key electrical quantities no greater than 0.5%
  • analog and binary event timestamp accuracy of ±1 ms or better
AURA-KP software provides:
  • Creating and printing system channel lists
  • Creation of virtual channels with no physical input
  • Creating channels calculated from other channel values
  • Manual measurement entry mode for any channel (blocking)
  • Manual substitution of any channel with another channel
  • Automatic substitution when a channel fails
  • Automatic substitution when a specified condition is met
  • Creating diagnostic channels for all system components
  • Individual spontaneous transmission settings for each channel
  • Individual channel lists for IEC 60870-5-104 clients
  • Individual channel lists for IEC 60870-5-101 clients
  • Individual channel addressing for IEC 60870-5-104 clients
  • Maintenance of a live measurement database (MS Access)
  • Creation of a web-based view of the site accessible over the Internet
  • IEC 60870-5-104 and IEC 60870-5-101 channel tracing